+41 41 790 50 50 service@jetcut.ch

High-Pressure

The JET CUT POWER high-pressure pumps are based on the intensifier principle

An electric motor powers an hydraulic aggregate which alternatively activates two or four parallelly positioned and separately powered intensifiers that transmit the pressure of the oil hydraulic in a ratio between 1:12 and 1:16 on to the water.

As water is about 10 % compressible at 3’000 bar, the two intensifiers work phase-deferred. Sensors scan the end-positions of the plungers and secure an imperceptible handing over of the intensifying process from one plunger to the other. An internal PLC controls the movements of the plungers. Therefore JET CUT POWER high-pressure pumps are highly pressure-stable. There is no need for a pressure accumulator.

Advantages of the JCP:

  • Constant pressure due to two single powered intensifiers
  • No pressure accumulator required
  • Automatic pressure release
  • Easy and fast maintenance
  • Integrated micro- and pre- filtration
  • Inegrated operation and working security
  • Intelligent PLC-control for various applications
  • Free support by phone

JET CUT POWER Edition

Technical specifications JCP 30 JCP 45 JCP 55
Output 3.8l/min 4.7l/ min. 6l/min
Power 30kW 45kW 55kW
Maximum pressure 4000 bar 4000 bar 4000 bar
2 Pressure stages yes yes yes
Electrical connection 3x400V / 230V, 50Hz 3x400V / 230V, 50Hz 3x400V / 230V, 50Hz
min. necessary air pressure 6bar 6bar 6 bar
Cooling Systems Oil – water/ or Oil – air Oil – water/ or Oil – air Oil – water/ or Oil – air
Dimension (w x h x d) 1500x1400x1400mm 1500x1400x1400mm 1500x1400x1400mm
Weight 1700 kg 1800 kg 1900 kg
Volume ca. 76dB ca. 78dB ca. 80dB

JET CUT POWER LC Edition

Technical specifications JCP 7.5 JCP 11 JCP 22
Output 1.1 l/min 1.4l/min 2.8l/min
Power 7.5kW 11kW 22kW
Maximum pressure 4000 bar 4000 bar 4000 bar
2 Pressure stages no yes yes
Electrical connection 3x400V / 230V, 50Hz 3x400V / 230V, 50Hz 3x400V / 230V, 50Hz
min. necessary air pressure 6 bar 6 bar 6 bar
Cooling Systems Oil – air Oil – water/ or Oil – air Oil – water/ or Oil – air
Dimension (w x h x d) 1146x1100x1050mm 1146x1100x1050mm 1146x1100x1050mm
Weight 700kg 750kg 800kg
Volume ca. 70dB ca. 72dB ca. 74dB

JET CUT POWER integral 22kW

Technical specifications JCP integral 22kW
Output 2.8l/min
Power 22kW
Maximum pressure 4.000bar
2 Pressure stages yes
Electrical connection 3×400 / 230V, 50Hz
min. necessary air pressure 6bar
Cooling Systems Oil – water / or Oil – air
Dimensions (w x h x d) 798 x 615 x 1996mm
Weight 820kg
Volume ca.74dB

Other sizes on request

Jet Cut Power GmbH
Lettenstr. 8
CH-6343 Rotkreuz

Tel.:
+41 (0) 41 790 50 50
Fax:
+41 (0) 41 790 50 80
Mail:
service@jetcut.ch